M Series

M - Series
M series burners are designed for a wide range of applications such as boilers, heaters, furnaces, kilns and dryers. The M series offers natural gas, propane gas, air atomized #2-6 oil and combination gas/oil fuel options at capacities from 1,400,000 to 10,500,000 MBTU/Hour. Full modulation and cam trim adjustment provides optimum performance to meet load demand.
Features Include:
  • Gas, light and heavy oil fuels
  • Low-pressure air atomizing system on oil with rotary vane compressor
  • Piston-type positive displacement oil metering pump
  • Cam trim with 14-point adjustment range for consistent air/fuel ratios on models   M34-63
  • Nozzle line electric heater standard on medium to heavy oil burners
  • Gas manifold on oil burners standard for easy upgrade to combination units
  • Hinged combustion head for easy access and maintenance
  • Backward-curved impeller provides adequate combustion air for various furnace   pressures
  • Refractory combustion cone
  • Full modulation
  • UL & cUL listed
Capacities and Specifications
Notes :
Lower gas supply pressure configurations available for New York City requirements
  • Firing rates based on altitudes to 2000ft. above sea level.
    *  For firing rates at higher altitudes, consult factory.
  • Gas input based on natural gas at 1,000 Btu/cu.ft. and 0.60 gravity
  • Oil input based on 140,000 Btu/gal. on M, 145,000 Btu/gal. on MM and 150,000 Btu/gal. on ME series.
  • Boiler overall efficiency of 80% estimated.
  • *  Industrial Combustion does not guarantee overall boiler efficiency.
  • Gas pressure based on zero furnace pressure.
    *  For total pressure at manifold, add furnace pressure.
  • Impeller and motor HP is based on altitude up to 2,000 ft. above sea level, and up to 1.5" W.C. furnace pressure.
    *  For higher altitude or 50 Hz applications, consult factory.
M Series Brochure M Technical Data Sheets
Share by: